The Overview to retrofit Bi-xenon Projector Housing in Nissan Qashqai Headlight
Our client have upgrade his front lights with LED light bulb and HID bulb. The Nissan Qashqai housing is made with bi-xenon projectors, however when driving in rainfall day, the illumination of halogen bulb is also dark to see the front roadway. He determine to upgrade a brand-new headlight housing for his Qashqai.
- The brand-new Housing consists of bi xenon projector for low beam, a pair of 5500K HID bulb, canbus Aozoom ballast as well as halogen light bulb suit with projector for high beam of light. He contacted us to aid him finish the tuning.
- The dismantle actions were not made complex, less complex than retrofitting a projector. Due to the fact that the bulbs and also projector were set up in the housing currently. Tug the OEM housing off and then place the new one in it, the work was done.
Removed the bumper and also the OEM housing. It requires to be discovered that there is a wiring under the housing to fix it. When take apart the housing, it must remove the screws of the wiring out, as well as screw it into the new housing.
We complete the tuning for one hr. The light test is needed to do, because the light beam pattern need to conform to the Road Standard. When all things were done, setting up the ballast, accumulating the bumper and also test the light once again.
Upgrade a whole housing as opposed to a projector or some light bulbs, it will certainly be easier for the green-hand. As well as we do not need to stress over the quality of the aftermarket accessories such as ballast, projector and so on. In all, no issue what you retrofit with, the risk-free road regulations we need to comply to.
